进口不锈钢污水泵原理特点及品牌（图）

进口不锈钢污水泵采用大流道抗堵塞水力部件设计，大大提高污物通过能力，能有效地通过泵口径的5倍纤维物质和直径为泵口径约50%的固体颗粒。设计合理，配套电机合理，效率高，节能效果显著。机械密封采用双道串联密封，材质为硬质耐磨碳化钨，具有耐用、耐磨等特点，可以使泵安全连续运行8000小时以上。

产品特点

1、泵结构紧凑，体积小，移动方便，安装简便，无需建泵房，潜入水中即可工作，大大减小工程造价。

2、泵油室内设有油水探头，当水泵侧机械密封损坏后，水进入油室，探头发生信号，对泵实施保护。

3、可根据用户需要配备全自动安全保护控制柜，对泵的漏水，漏电，过载及超温等进行监控，保证泵运行可靠安全。

4、双导轨自动耦合安装系统，给泵的安装、维修带来了极大的方便，人可不必为此而进出污水坑。

5、浮球开关可根据所需的水位变化。自动控制泵的停启，无需专人看管。在使用扬程范围内保证电机运行不过载。

6、根据使用场合电机可采用水套式外第三者循环冷却系统，能保证电泵在无水(干式)状态下安全运行。

7、安装方式有固定式自动耦合安装和移动式自由安装二种，可满足不同的使用场合。

产品用途

德国托马斯(Thomas)不锈钢污水泵适用于化工、石油、制药、采矿、造纸工业、水泥厂、炼钢厂、电厂、煤加工工业，以及城市污水处理厂排水系统、市政工程、建筑工地等行业输送带颗粒的污水、污物，也司用于抽送清水及带腐蚀性介质。

Stainless steel sewage pump with large flowway anti-blocking hydraulic components designed to greatly improve the dirt through the ability to effectively pass the pump diameter of 5 times the fiber material and diameter of about 50% of the diameter of the pump particles. Reasonable design, supporting motor reasonable, high efficiency, energy saving effect is remarkable. Mechanical seal with double-channel series seal, the material is hard wear-resistant tungsten carbide, with durable, wear-resistant and other characteristics, can make the pump safe continuous operation for more than 8000 hours.

Features

1, the pump structure is compact, small size, easy to move, easy to install, no need to build pump room, dive into the water to work, greatly reducing the project cost.

2, pump oil room with oil and water probe, when the pump side of the mechanical seal damage, the water into the oil room, the probe signal, the implementation of the protection of the pump.

3, according to user needs with automatic safety control cabinet, the pump leakage, leakage, overload and over-temperature monitoring, to ensure reliable and safe operation of the pump.

4, dual-rail automatic coupling installation system, to the pump installation, maintenance has brought great convenience, people do not have to enter and leave the sewage pit.

5, the float switch can be changed according to the required water level. Automatic control of the pump stop, no special care. In the use of the scope of the motor to ensure that the motor is not overloaded.

6, according to the use of the machine can be used outside the water jacket outside the third-party cooling system, to ensure that the pump in the anhydrous (dry) state safe operation.

7, the installation of a fixed automatic coupling installation and mobile free installation of two, to meet the different use of the occasion.

Product Usage