进口磁力离心泵原理特点及品牌（图）

进口磁力离心泵是应用现代磁学原理，采用内外磁钢推拉传递，磁路中间用隔离套将液体封闭在隔离套内，以静密封代动密封，彻底解决了其它泵机械密封无法避免的跑、冒、滴漏之弊病。该磁力泵是德国托马斯(Thomas)工厂按照国际标准生产，其技术性能达到世界同类产品的选进水平。该泵具有结构简单、外型美观、体积小、噪音低、运转可靠、使用维修方便等优点。按材质分为不锈钢和工程塑料两大类。是目前应用最广泛的无泄漏泵。

产品特点

1、以静密封取代动密封，使泵的过流部件处于完全密封状态，彻底解决了其它泵机械密封无法避免的跑、冒、滴之弊病。

2、选用耐腐蚀、高强度的工程塑料、钢玉陶瓷，不锈钢等作为制造材料，因此它具有良好的抗腐蚀性能，并可以使被输送介质免受污染。

3、过流部件采用不锈钢、高密度碳、高纯氧化铝陶瓷、填充聚四氟乙烯等耐腐蚀材料制造，加上无泄漏密封结构设计，确保化学流体的安全输送。

4、泵的最高效率达到50-55%，泵的设计过程是充分考虑了节能。

5、结构简单，主要部件模块化，以便于简便快速成的拆卸和检查，易损件可单独更换。

产品用途

Magnetic centrifugal pump is the application of modern magnetic principle, the use of internal and external magnet push and pull transmission, magnetic circuit with a middle of the isolation sleeve will be closed in the isolation of liquid, sealed with static seal, completely solve the other pump mechanical seal can not avoid running, Take the risk of dripping. The magnetic pump is the German Thomas (Thomas) factory in accordance with international standards of production, its technical performance to achieve the level of similar products in the world. The pump has the advantages of simple structure, beautiful appearance, small size, low noise, reliable operation and easy maintenance. According to the material is divided into two major categories of stainless steel and engineering plastics. Is currently the most widely used without leakage pump.

Features

1, with a static seal to replace the dynamic seal, so that the pump flow components in a completely sealed state, completely solve the other pump mechanical seal can not avoid running, taking, drop the ills.

2, the choice of corrosion-resistant, high-strength engineering plastics, steel jade ceramics, stainless steel as a manufacturing material, so it has good corrosion resistance, and can be transported from the media from pollution.

3, the flow components using stainless steel, high density carbon, high purity alumina ceramic, filled with PTFE and other corrosion-resistant materials, coupled with no leakage seal structure design to ensure the safe delivery of chemical fluid.

4, the pump maximum efficiency of 50-55%, the pump design process is fully considered the energy saving.

5, the structure is simple, the main components of modular, in order to facilitate the rapid and easy to disassemble and inspection, wearing parts can be replaced separately.

Product Usage