进口自吸式排污泵原理特点
进口自吸式排污泵又称固液泵或杂质泵。该系列泵水力设计独特,叶轮是缩在单独的叶轮室内,连接叶轮室的是压水室,当叶轮旋转时,泵内液体产生强烈的轴向涡流作用,使进口造成真空,出口产生扬程。因而杂质可以从压水室排出,所以它的流道是完全畅通的,其排污效果是其他自吸式排污泵无可比拟的。德国托马斯生产的自吸式排污泵可像自吸清水泵那样不需要安装底阀,又可吸排含有大颗粒固体块、长纤维、沉淀物、废矿杂质、粪便处理及一切工程污水物。可广泛适用于市政排污工程、轻工、造纸、纺织、食品、化工、电业、石油、矿山和河塘养殖等行业。它是目前国际抽送固体颗粒、纤维、浆料和混合悬浮等介质最理想的杂质泵。
适用范围
适用于化工、石油、制药、采矿、造纸、纤维、浆料、纺织、食品、电厂及市政排污工程、公共设施排污、河塘养殖等行业。
使用条件
1、环境温度≦50℃,介质温度≦80℃特殊要求可达200.℃
2、介质PH值铸铁材质为6-9,不锈钢为2-13.
3、介质重度不超过1240千克/m3
4、自吸高度不能超过规定值4.5-5.5米,吸入管长度为≦10米。
5、通过能力悬浮颗粒直径为泵口径的60%,纤维长度为泵口径的5倍。
产品优点
1、排污能力强:特殊的叶轮防堵设计,确保了泵高效且无堵塞。
2、高效节能:采用优秀水力模型,效率比一般自吸泵高3~5%。
3、自吸性能好:自吸高度比一般自吸泵高1米,且自吸时间更短。
技术参数
流量:5-800m3/h;
扬程:12-60m;
电机功率:2.2-132KW;
转速:1450-2900r/min;
口径:φ25-φ300;
介质温度:≤100℃;
自吸高度:4.5-6.0m。
Self-priming sewage pump, also known as solid-liquid pump or impurity pump. The series of pump hydraulic design unique, the impeller is reduced in a separate impeller room, connecting the impeller chamber is the pressure chamber, when the impeller rotation, the pump liquid produces a strong axial vortex effect, so that imports caused by vacuum, So the impurities can be discharged from the water chamber, so its flow channel is completely smooth, and its sewage effect is the other self-priming sewage pump unparalleled. Germany Thomas production of self-priming sewage pump can be self-priming as the pump does not need to install the end of the valve, but also pumping with large particles of solid particles, long fiber, sediment, waste impurities, fecal treatment and all engineering sewage. Can be widely applied to municipal sewage engineering, light industry, paper, textile, food, chemical, electrical, oil, mining and pond farming and other industries. It is currently the best pumping of solid particles, fiber, slurry and mixed suspension and other media the best impurity pump.
The scope of application
Applicable to chemical industry, petroleum, pharmaceutical, mining, paper, fiber, pulp, textile, food, power plant and municipal sewage works, public facilities, sewage, pond farming and other industries.
Conditions of Use
1, ambient temperature ≦ 50 ℃, medium temperature ≦ 80 ℃ special requirements up to 200. ℃
2, the media PH value cast iron material for 6-9, stainless steel for 2-13.
3, medium heavy no more than 1240 kg / m3
4, self-priming height can not exceed the specified value of 4.5-5.5 m, suction pipe length of ≦ 10 m.
5, through the capacity of suspended particles diameter of 60% of the pump diameter, fiber length of 5 times the pump diameter.
product advantages
1, strong sewage capacity: a special impeller anti-blocking design to ensure that the pump is efficient and no clogging.
2, energy efficient: the use of excellent hydraulic model, the efficiency of self-absorption pump than the general 3 to 5%.
3, self-priming performance: self-priming height than the general self-priming pump 1 meter high, and self-priming time is shorter.
Technical Parameters
Flow: 5-800m3 / h;
Head: 12-60m;
Motor power: 2.2-132KW;
Speed: 1450-2900r / min;
Caliber: φ25-φ300;
Medium temperature: ≤ 100 ℃;
Self-priming height: 4.5-6.0m.
进口自吸式排污泵品牌
德国托马斯阀门集团于1933年创建于德国鲁尔工业区,也是世界最重要的工业区。位于德国西部、莱茵河下游支流鲁尔河与利珀河之间的地区。德国托马斯阀门集团是以生产高品质、先进的阀门、测量及控制系统而享誉全球的跨国性生产企业。采用世界先进的设备及生产工艺,所有产品都在严格的质量体系监控下完成作业。并在各大洲几十个国家拥有子公司及分支机构。