进口热水管道泵原理特点及品牌（图）

进口热水管道泵为管道增压输送，解决管道压力过低而研制的新颖泵，比目前应用卧式离心泵具有很大的优越性。由于采用德国托马斯(Thomas)自有机械密封，电机主轴直接安装叶轮，故有效率高、耗电省、结构紧凑、体积小、重量轻、装修方便等特点，并可根据扬程与流量需要并串联使用。

主要用途

1、适用于高层建筑增压送水、园林喷灌、冷却塔上水、远距离输水、空调、制冷冲洗、浴室等冷暖水循环加压。使用温度80℃以下。

2、适用于采暖、锅炉等行业的高温热水增压循环。使用温度150℃以下。

3、适用于输送食品、制药、造酒、化工等行业的工艺流程中腐蚀性介质，使用温度100℃以下。

4、适用于输送无腐蚀性液体，有甲烷或煤矿井下固定设备Ⅰ类及工厂ⅡA、ⅡB级，温度组别为T1、T2、T3、T4组存在爆炸性混合物的其它工业场所。使用温度80℃以下。

5、适用于输送化工、制药、石油、食品、国防等工业腐蚀性液体，有甲烷或煤矿井下固定设备Ⅰ类及工厂ⅡA、ⅡB级，温度组别为T1、T2、T3、T4组存在爆炸性混合物的其它工业场所。使用温度150℃以下。

使用条件

1、进口管水压不大于3公斤/立方厘米，不小于0.2公斤/立方厘米，水质为清水，不应有纤维或固体颗粒，对热水应为软水；

2、介质温度：不低于0℃；

3、周围环境温度不超过±45℃；

4、电源电压380V，部分为220V。

Hot water pipeline pump for the pipeline pressurized transport, to solve the pipeline pressure is too low and developed a new pump than the current application of horizontal centrifugal pump has great advantages. As a result of the use of Germany Thomas (Thomas) own mechanical seal, the motor spindle directly installed impeller, it is efficient, power consumption, compact, small size, light weight, easy decoration and other characteristics, and according to the head and flow requirements and Used in series.

The main purpose

1, for high-rise building pressurized water, garden irrigation, cooling tower Sheung Shui, long-distance water, air conditioning, refrigeration and washing, bathroom and other cold water cycle pressure. Use temperature below 80 ℃.

2, for heating, boilers and other industries of high temperature hot water pressurized cycle. Use temperature below 150 ℃.

3, suitable for conveying food, pharmaceutical, wine making, chemical and other industries in the process of corrosive media, the use of temperature below 100 ℃.

4, suitable for the transport of non-corrosive liquids, methane or coal mine fixed equipment Class I and factory Ⅱ A, Ⅱ B level, the temperature group T1, T2, T3, T4 group there are explosive mixtures of other industrial sites. Use temperature below 80 ℃.

5, suitable for the transportation of chemical, pharmaceutical, petroleum, food, defense and other industrial corrosive liquids, methane or coal mine fixed equipment Class I and factory Ⅱ A, Ⅱ B level, the temperature group T1, T2, T3, T4 group explosive Other industrial sites of the mixture. Use temperature below 150 ℃.

Conditions of Use

1, the inlet pipe pressure is not more than 3 kg / cubic centimeter, not less than 0.2 kg / cubic centimeter, water quality for the water, there should be no fiber or solid particles, hot water should be soft water;

2, the medium temperature: not less than 0 ℃;

3, the ambient temperature does not exceed ± 45 ℃;